__ _ __ _ __ ___
/ / (_) /____ | |/_/___/ _ |_______ _______
/ /__/ / __/ -_)> </___/ __ / __/ _ \/ __/ _ \
/____/_/\__/\__/_/|_|__ /_/ |_\__/\___/_/ /_//_/
/ _ )___ ____ ___ / / ___ ___ ________/ /
/ _ / _ `(_-</ -_) _ \/ _ \/ _ `/ __/ _ /
/____/\_,_/___/\__/_.__/\___/\_,_/_/ \_,_/
Copyright 2021 / Enjoy-Digital
[> Intro
The LiteX-Acorn-Baseboard is a baseboard developed around the SQRL’s Acorn board (or Nite/LiteFury) expanding their possibilities with:
- A PCIe X1 connector.
- A SFP connector.
- A M2 SATA slot.
- An EPC5 FPGA (connected to the Acorn through a SerDes link) and providing:
- A JTAG/UART port.
- A 1Gbps Ethernet port (RGMII).
- A HDMI Out port.
- A SDCard slot.
- 4 PMODs.
- 2 Buttons.
- A LCD.
- 2 SATA connectors (connected to the ECP5’s SerDeses).
The board is mainly intended to be used as a development board for LiteX: From regression testing to development of new features; but can also
be a nice and cheap FPGA development board for developers willing to play with PCIe, SFP, SATA, etc… or wanting to create an standalone and
open source Linux platforms.
[> Prerequisites
- Python3, Vivado.
- Either a Vivado-compatible JTAG cable (native or XVCD), or OpenOCD.
[> Installing LiteX
$ wget https://raw.githubusercontent.com/enjoy-digital/litex/master/litex_setup.py
$ chmod +x litex_setup.py
$ sudo ./litex_setup.py init install
… or follow the installation instructions if the LiteX Wiki: https://github.com/enjoy-digital/litex/wiki/Installation
[> Designs
TODO
[> Contact
E-mail: [email protected]
