we’ve put together a collection of the best Class D Amplifiers that are currently available on the market. To help you find the perfect Class D Amplifier among a wide variety of options, we constantly update our collection with new and trending models.

10 Best Class D Amplifiers

Based on dozens of customer reviews and ratings, the followings are the top 10 best-selling Class D Amplifiers:

Top Rated Class D Amplifier Reviews

Since we’ve mentioned 10 different models of Class D Amplifiers on the above list, it may be difficult for you to find the right one for your needs. This is why we listed the key features of each of these Class D Amplifiers below:

1

Product Highlights:

  • Class D MOSFET Monoblock Power Amplifier
  • Peak Power at 1 Ohm: 388 Watts | RMS Power at 1 Ohm: 350 Watts
  • Frequency Response: 20Hz – 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
  • Featuring 4-Way Protection Circuitry and 8 AWG Power & Ground Input Terminals for Maximum Current Flow
  • Stable at 1 ohm | Remote Subwoofer Level Control Included
  • Highly Efficient Heatsink Design allows for Maximum Reliability & Performance
2

Product Highlights:

  • Power – 3000 Watts Max x 1 @1-Ohm, 1500 Watts Max x 1 @2-Ohms
  • Class D – Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
  • 1 Ohm Stable – Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
  • Strapping Capable – You are able to strap TWO PL3000.1D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power
  • Variable Subsonic Filter – To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion
  • Variable Low-Pass Crossover – Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
  • Variable Bass Boost – Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
  • Specs – Dimensions: 11.9” x 7” x 2.3”, Weight 6.7 lbs.
3

Product Highlights:

  • Power – 3400 Watts Max x 1 @1-Ohm, 1700 Watts Max x 1 @2-Ohms, 850 Watts Max x 1 @4-Ohms
  • Class D – Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
  • 1 Ohm Stable – Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
  • Mosfet Power Supply – A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
  • Strapping Capable – You are able to strap two R3400D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power
  • Variable Subsonic Filter – To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion
  • Variable Low-Pass Crossover – Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
  • Specs – Dimensions: 13.5” x 10.44” x 2.25”, Weight: 7.63 lbs.
  • Warranty – BOSS Audio Systems provides a powerful 6 year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.Com. We strongly encourage professional installation of this product to ensure proper and safe functionality
4

Product Highlights:

  • Car audio amplifier with 400 watts RMS power at 1-ohm load (14.4v); 300 watts RMS at 2-ohm load (14.4v); 150 watts RMS at 4-ohm load (14.4v); Frequency response: 0 to 320 Hz (Bass Knob Included)
  • Small footprint and compact chassis makes this mono amplifier easy to install in any vehicle or car audio application; but don’t let the size fool you, this 400 watt amplifier absolutely pounds
  • Engineered to be the most efficient car monoblock amplifier in its class so that you can get the most out of your vehicle’s electrical system
  • MOSFET pulse width modulated power supply and proprietary heat dissipation design will ensure the amplifier for car subwoofers runs cool for even the most demanding playlists
  • 4-way protection circuitry features high voltage, low voltage, over current, and high-temperature protection; sleep easy at night knowing your class d amplifier car audio is protected
5

Product Highlights:

  • Features: Monoblock Class D Amplifier. Power Handling: Maximum Output Power at 14.4V DC 1-Ohm: 3000W RMS | Maximum Output Power at 14.4V DC 2-Ohm: 2025W RMS | Maximum Output Power at 14.4V DC 4-Ohm: 1140W RMS. Input Sensitivity: 200MV, Signal-to-Noise Ratio: 86dB, Frequency Response: 10Hz-20kHz (-3dB).
  • Crossover: High Pass Filter: 15 to 80Hz (-12dB/8) Variable | Low Pass Filter: 80Hz to Full (-12dB/8) Variable. Bass Boost: 0 to 12dB (50Hz), Thermal Management: Smart Cooler (Fan Powered by Temperature or Audio with 3 Speeds), Input Impedance: 56K-Ohms, Protection System: Output Short/High/Low Supply Voltage/Thermal Protection, Minimum Supply Voltage: 9V DC, Maximum Supply Voltage: 16V DC, Dimensions: TBA.
6

Product Highlights:

  • POWER: 4000 Watts Max x 1 @1-Ohm, 2000 Watts Max x 1 @2-Ohms. DIMENSIONS: The OX4KD is 14.3 inches in Depth, 7 inches in Width and 2.3 inches in Height. It weighs 7.8 lbs.
  • CLASS D: Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
  • 1 OHM STABLE: Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
  • STRAPPING CAPABLE: You are able to strap TWO OX4KD amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power
  • WARRANTY: BOSS Audio Systems provides a powerful 6 year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.Com. We strongly encourage professional installation of this product to ensure proper and safe functionality
Sale7

Product Highlights:

  • ❶ This AIYIMA A07 power amplifier adopt the TPA3255D2 amp chip and NE5532 op-amp chip.Very Quiet, Runs Extremely Cool,Easy to set up.It’s a nice mini audio component amplifiers for Home Audio stereo system
  • ❷ 300W+300W HiFi integrated class D amplifier, Exclusively designed for the customers who pursue HiFi sound,High efficient max power output up to 300 Watt
  • ❸ Two input ways:3.5mm AUX Audio input/ RCA Audio input(3.5mm interface is also Aux Audio output interface(3.5mm AUX sed as audio output can go to connect any Powered device: Speakers, Amplifier,Active Subwoofer ect.).More detail connection and use ways,pls see the main picture shown)
  • ❹ Simple compact design,And the exterior design is delicate and beautiful little amp,It can match with your computer/ desktop /Home theatre system and so on;A computer, an tube preamp(TUBE A3 PRO / T7 / T8), matched with our A07 home speaker amplifier, connected to your home audio passive speakers to form a perfect HIFI system, allowing you to liberate your ears in this noisy city
  • ❺ Package with a DC 32V 5A Power Adapter for free,But if you want to get the maximum power of 300W, you need to buy a power adapter that uses DC 48V and current is above 7A(Cannot use industrial power supply,and please choose the correct passive speaker power to use ).
8

Product Highlights:

  • Excellent for voice as well as bass
  • 2 ohms. Freq.: 35Hz ~55Hz
  • 8000 watts
  • Mono
  • Bass boost
9

Product Highlights:

  • Show your friends you can do 70 mph down the highway with the windows down and still have crisp and clean sound over the wind noise with this car speaker amplifier
  • Small footprint and compact chassis makes this amplifier easy to install in any vehicle or 4ch amplifier car audio application; but don’t let the size fool you, this 4ch car amp produces amazing sound quality
  • MOSFET pulse width modulated power supply, premium components, and proprietary heat dissipation design will ensure the four channel car amplifier runs cool for even the most demanding playlists
  • 4-way protection circuitry features high voltage, low voltage, over current, and high-temperature protection for your car stereo power amplifier
  • Car stereo amplifier with 110 watts RMS at 2-ohm load x 4-channels (14.4v); 80 watts RMS power at 4-ohm load x 4-channels (14.4v); 160 watts RMS at 4-ohm bridged x 2-channels (14.4v)
10

Product Highlights:

  • 300 Watts x 1 @ 4-Ohms, 500 Watts x 1 @ 2-Ohms, Frequency 20Hz to 250Hz +/-1dB
  • Onboard 12dB/octave LP/HP/AP crossover & Infrasonic filter. Power Wire Gauge- 4 AWG. Power Input Connector-Screw Terminal. Suggested Alternator-75 A
  • On-board Punch EQ with +18dB boost at 45Hz. Input Sensitivity: 150 mV to 4 V
  • Cast Aluminum Heatsink with Stealth top mounted control panel
  • Includes wired remote (Punch Level Control). High efficiency amplifier design that reduces current consumption from the charging system

Video Overview

What are the differences between Class A, AB, and Class D amplifiers?

Confused about the differences between Class A, Class AB, and Class D amplifiers? Join Paul as he explains the differences between these different amplifier …

Final Words

So, these are all of the Best Class D Amplifiers available on the market. We hope this collection was helpful to find the right Class D Amplifier for the money. However, we recommend checking out the features, benefits, and problems of each of these Class D Amplifiers before taking your decision.