RGB Text Fan Controller
This repository contains scripts to control a RGB text fan attached to a Raspberry Pi.
The Raspberry Pi and RGB text fan need to be wired as followed:
The following dependencies need to be installed:
sudo apt-get install libusb-1.0-0.dev sudo pip3 install git+https://github.com/LukePrior/microwave_usb_fan sudo pip3 install Flask
The script can be run with:
sudo python3 main.py"
The website can then be accessed from the Pi's local IP on port 80.
You can find the complete installation and setup guide in the Diyode Magazine article.