lab_tool is a system that is used for ethical hacking and computer security tests, this system is also a python library.
This tool is only for educational purpose.
If you use this tool for other purposes except education we will not be responsible.
The requirements to use the system is to have the following python modules installed:
colorama requests wheel
To install lab_tool on linux run these commands on your Linux Terminal.
git clone https://github.com/dylan14567/lab_tool cd lab_tool chmod +x *;ls python3 setup.py install
Once done, it begins to install.
to start lab_tool you just have to put the
lab_tool command in the terminal.
To use the lab_tool command you just have to put the
lab_tool command, and once that is done the system console will be loaded.
Inside the lab tool console place the
help command to know more information about how to use the system
If you want to create your own system and your own code using the labtool module you must do the following:
from labtool.scanners import * scanner = scanner () header = header () scanner.scanports(127.0.0.1) # Scan the ports of an ip scanner.scanweb ('http://127.0.0.1') # Gives information from a website