Watchdog for your Chia farm

So you've become a Chia farmer and want to maximize the probability of getting a reward? Chiadog helps with automated monitoring and sends you a mobile notification in case something appears to malfunction.

Supported Notifications

Please refer to Status Reference page for detailed
explanations of the notifications.

How it works?

It parses the debug.log generated by the chia process and runs various checks to determine the health of your farmer.
Among others, it can detect if your node has lost sync and the farmer is no longer participating in challenges, or if
one of your external HDDs disconnected and your harvester doesn't have access to the full amount of plots you have.

Access & Security

It only requires read-access to your debug.log file and internet connection to send out notifications. It's highly
recommended that you run chiadog in a sandboxed environment - this is described in the advanced section below.

Furthermore, following best security practices, you
should keep your wallet separate.

Supported Integrations for Notifications

You may use one (or more) of the following integrations to receive notifications from chiadog.

For detailed guide on how to test and configure, please refer to INTEGRATIONS.md.

Getting started

Pre-requisites

• Linux, MacOS & Windows
• Python 3.7+
• Git
• Enabled INFO logs on your chia farmer

The instructions below are specific to Linux and MacOS, for installing chiadog on Windows, please refer to this
separate README section.

How to enable INFO logs on chia farmer?

First configure the log level to INFO. This ensures that all logs necessary for chiadog to operate are available
under ~/.chia/mainnet/log/debug.log.

chia configure -log-level=INFO

Then restart your farmer to apply the changes:

chia start --restart farmer

Check that logs are coming in:

cat ~/.chia/mainnet/log/debug.log

Installation

For updating from previous version, see section below.

1. Clone the repository

git clone https://github.com/martomi/chiadog.git
cd chiadog

2. Run the install script.

./install.sh

3. Copy the example config file

cp config-example.yaml config.yaml

4. Open up config.yaml in your editor and configure it to your preferences.

Updating to the latest release

Skip this if you followed the above section.

cd chiadog

git fetch
git checkout main
git pull

./install.sh

Important: Automated migration of config is not supported. Please check that your config.yaml has all new fields introduced in config-example.yaml and add anything missing. If correctly migrated, you shouldn't get any ERROR logs.

Monitoring a local harvester / farmer

1. Open config.yaml and configure file_log_consumer:

   • You need to enable the file log consumer to read local chia log files
   • Double-check that the path to your chia logs is correct

2. Start the watchdog

./start.sh

3. Verify that your plots are detected. Within a few seconds you should see INFO log:

Detected new plots. Farming with 42 plots.

If you see the above log message, you can be certain that chiadog is running correctly. It'll remain silent until the
next scheduled daily notification or until any issues are detected.

You can repeat the above process for every machine where you are running a harvester. Use
the notification_title_prefix
in config.yaml to give every machine a unique notification prefix so that you can easily distinguish them.

If you don't want to setup chiadog on each machine separately, you can also monitor multiple remote harvesters and run
chiadog on a single machine. Please refer to the wiki page
on Remote Monitoring Multiple Harvesters.

Troubleshooting

You can enable more verbose logging from config.yaml by changing INFO to DEBUG. You should see logs for every
keep-alive event from the harvester.

Advanced Usage

Redundant monitoring for chiadog

There are failure-cases in which chiadog is helpless. For example, your computer completely freezes or shuts down.
Perhaps your entire home network goes down.
chiadog won't be able to send you a notification.

There's a way however: in the config under the section of keep_alive_monitor, you can enable
pinging to a remote service that will act as a watchdog of chiadog. A second level of redundancy, if you wish!

You may chose your favourite service for that, I've tested it with
HealthChecks.io. It's free to signup and create an endpoint that expects to receive pings
every 10 minutes. If it does not, it will notify you. It has integrations with Pushover, Email, Slack, Discord and more.

Running chiadog in the background

. ./venv/bin/activate
nohup python3 -u main.py --config config.yaml > output.log 2>&1 &

To stop chiadog, you can find the Process ID (PID) via ps aux | grep main.py and then softly interrupt the process
with kill -SIGINT <pid_here>.

Running chiadog in sandboxed environment

We're in the early stages of exploring the best way to provide easy to setup sandboxed environment where the chiadog
process is completely isolated from potentially accessing your private keys. Contributions in that direction are very
welcome. Meanwhile you can check out @ajacobson repository
for chiadog-docker.

Alternatively, as suggested here you can run chiadog from a unix user
with limited permissions.

GitHub

https://github.com/martomi/chiadog