Activate Numpad inside the touchpad with top right corner switch or F8 key

Asus touchpad numpad driver

This is a python service which enables switching between numpad and touchpad for the Asus UX433. It may work for other models.

Without % = symbols	With % = symbols	With % = symbols (but incompatible with the non-universal version)
Model/Layout = ux433fa	Model/Layout = m433ia	Model/Layout = ux581l

This is a python service which enables switching between numpad and touchpad for the Asus UX433.
It may work for other models.

This python driver has been tested and works fine for these asus versions at the moment:

Install required packages

sudo apt install libevdev2 python3-libevdev i2c-tools git

sudo pacman -S libevdev python-libevdev i2c-tools git

sudo dnf install libevdev python-libevdev i2c-tools git

Then enabble i2c

sudo modprobe i2c-dev
sudo i2cdetect -l

Now you can get the latest ASUS Touchpad Numpad Driver for Linux from Git and install it using the following commands.

git clone https://github.com/mohamed-badaoui/asus-touchpad-numpad-driver
cd asus-touchpad-numpad-driver
sudo ./install.sh

To turn on/off numpad, tap top right corner touchpad area or F8 key.

To uninstall, just run:

sudo ./uninstall.sh