This repository allows the user to automatically scale a 3D model/mesh/point cloud on Agisoft Metashape, given a set of 2D coordinates (in a local
coordinate reference system – CRS) of N markers collimated onto one (or M) plane(s).

The number of markers N and planes M is arbitrary.

The coordinates must be stored into a .yaml file like the example pars.yaml.

Starting from the provided set of markers, the script scalebars.py generates all the possible scale bars per plane, and subdivides them into two equally numerous subsets of control and check bars.

Because of this, in the same .yaml parameter file, the user must also provide the accuracy of the scale bars, and the chunk id of the 3D model/mesh/point cloud to scale.

After the 3D model/mesh/point is scaled, the RMSE of the control and check bars is saved into a Statistics_scalebars.txt file.

To run the script scalebars.py, the user must launch Metashape, press CTRL + R, and write the path of the script scalebars.py as Script and the path of the .yaml
file as Argument.

The script test.py, instead, allows the user to assess the relationship between RMSE and number of scale bars; to investigate this relationship from a statistically relevant
point of view, the test is repeated I times, where I is the number of iterations (which is a parameter to set in the .yaml file).

The values of RMSE are then saved to a .csv file, whose path must be defined in the .yaml file.

Finally, a plot of the relationship is produced.

To launch the script test.py, the same instructions as scalebars.py can be followed.