FCS-applications

Source code for CsiNet and CRNet using the Fully Connected Layer-Shared feedback architecture.

Introduction

This repository contains the program of the training and testing procedures of FCS-CsiNet and FCS-CRNet proposed in Boyuan Zhang, Haozhen Li, Xin Liang, Xinyu Gu, and Lin Zhang, “Fully Connected Layer-Shared Network Architecture for Massive MIMO CSI Feedback” (submitted to IET Electronics Letters).

Requirements

  • Python 3.5 (or 3.6)
  • Keras (>=2.1.1)
  • Tensorflow (>=1.4)
  • Numpy

Instructions

The following instructions are necessary before the network training:

  • The repository only provide the programs used for the training and testing of the FCS-CsiNet and FCS-CRNet in the form of python files. The network models in the form of h5 files are not included.
  • The part “settings of GPU” in each python file should be adjusted in advance according to the device setting of the user.
  • The experiments of different Compression Rates can be performed by adjusting the “encoded_dim” in the programs.
  • The folds named “result” and “data” should be established in advance in the folds “FCS-CsiNet” and “FCS-CRNet” to store the models obtained during the training procedure and to store the dataset used for training and testing.
  • The dataset used in the network training can be downloaded from https://drive.google.com/drive/folders/1_lAMLk_5k1Z8zJQlTr5NRnSD6ACaNRtj?usp=sharing, which is first provided in https://github.com/sydney222/Python_CsiNet). The dataset should be put in the folds “data”. Therefore, the structure of the folds “FCS-CsiNet” and “FCS-CRNet” should be:

*.py
result/
data/
  *.mat

Training Procedure

The training and testing procedures are demonstrated as follows:

Step.1 Main training process

Run Step1_main_training_1.py and Step1_main_training_12.py to obtain the parameters of the shared FC layer and the pre-trained models of the other parts of the network.

Step.2 Assistant review processes

Run Step2_assistant_review.py to obtain the model used in Scenario_1. The feedback accuracy of the model in Scenario_1 will be also be calculated in Step.2.

Step.3 Assistant compensation process

Run Step3_assistant_compensation.py to obtain the model used in Scenario_2. The feedback accuracy of the model in Scenario_2 will be also be calculated in Step.3.

The results are given in the submitted manuscript “Fully Connected Layer-Shared Network Architecture for Massive MIMO CSI Feedback”.

GitHub

View Github